YES

The YES-PB6 was a tabletop vacuum cure system in the PB Series, and support for it was discontinued effective January 1, 2021.

The CV200RF Series is a plasma strip/descum system line with automated wafer handling, used for photoresist removal, polyimide removal, organics removal, CD master cleaning, and descum processes.

The YES 12-2P-CP is a manual-load high-temperature cure oven for MEMS and semiconductor process applications.

YES-3TA is a Vacuum Bake / Vapor Prime system in the YES Vacuum Bake/Vapor Prime product line, with capacity for 8 cassettes of 4-inch wafers or 1 cassette of 5-8 inch wafers.

The Glen/YES 1000FP is a plasma cleaning system designed to accept a range of shelf sizes for changing flat panel industry needs.

Model 1518 is a dual-function ultra-clean system for HMDS prime and image reversal with stated capacities for 4-inch through 8-inch wafer cassettes.

The YES PBX4-300 is a fully automated 300mm and 200mm polyimide/BCB/copper anneal and vacuum bake system from Yield Engineering Systems.

The YES CV200 RFS Plasma Strip / Descum System is a plasma stripping and descum tool for photoresist, polyimide, organics removal, and descum processes.

The YES G1000 Plasma Cleaning System is a plasma cleaning system for cleaning and low-temperature descum of substrates, surface modification, and gentle cleaning of inorganic substrates.

The 1000P is a plasma cleaning system with four 16 x 16 inch shelves and a total capacity of 1024 square inches.

The YES-R1 is a bench-top plasma cleaner from Yield Engineering Systems that uses low-pressure gas plasma to remove organic contamination and surface-activate parts and substrates.

The YES R3A is a low-frequency, batch-process plasma cleaning system designed for surface treatment of wafers.

The MKS 253B-2-2-2 is a butterfly exhaust throttle valve that regulates gas removal from a vacuum chamber when used with an MKS controller.

The Yes 450 PB 8-4 is an oven.

The YES 450 PB 8 Polyimide Bake Oven is a nitrogen/vacuum oven designed for polyimide curing and handling up to two cassettes of 8-inch wafers.

The YES-10TA is a dual-function vacuum bake/vapor prime and image reversal system for semiconductor wafer processing.

The YES-310TA is a Yield Engineering HMDS oven listed in the thermal processing equipment at the UD Nanofabrication Facility.

The Yes Sir Technology YS-N-IC 60 is a nitrogen generator with vintage years of 2020 and 2021.

The YES 15 HMDS Vapor Prime Oven is a vacuum oven used for HMDS vapor priming to improve photoresist adhesion on wafers.

YES-6112 is an ultra-clean Vacuum Bake/Vapor Prime system for 8-inch wafers.

YES-8TA is a dual function vacuum bake/vapor prime and image reversal system listed by Yield Engineering Systems.

The Yes 450 PBS 2 is an equipment model from manufacturer Yes with the model designation 450 PBS 2.

The Yes 450 PB 8-2 P-CP Vacuum Oven is a stand-alone vacuum oven for 4, 5, 6, and 8 inch wafers.

YES PB12P-CP is a manual batch and automated vacuum oven from Yield Engineering Systems, used for polyimide, BCB, and copper anneal processes.

The YES-5TA is a Vacuum Bake / Vapor Prime system in the YES vacuum bake product line.

The YES 500 is an in-line plasma cleaner, described as the IL 500 AUTO In-Line Plasma System, a robotically loaded fully automatic plasma system.

The III HMDS Vapor Prime Vacuum is an HMDS vapor prime and vacuum oven manufactured by YES.

The YES 450PB-HV is a high-vacuum cure oven for MEMS processing that uses high temperature and high vacuum to remove moisture and hydrogen.

The YES-58TASM is a Vapor Prime, Image Reversal, and Silylation system from Yield Engineering Systems, supporting wafers up to 6 inches.

The MKS Type 253B Exhaust Throttle Valve is a butterfly valve used to regulate removal of gas from a vacuum chamber when used with an MKS controller.

The MKS Type 253B Exhaust Throttle Valve is a butterfly valve that regulates the removal of gas from a vacuum chamber when used with an MKS controller.

The MKS Type 253B Exhaust Throttle Valve is a butterfly valve for regulating gas removal from a vacuum chamber when used with an MKS controller.

The MKS Type 253B Exhaust Throttle Valve is a butterfly valve for regulating or shutting off gas removal from a vacuum chamber when used with an MKS controller.

The MKS Type 253B Exhaust Throttle Valve is a butterfly valve designed to regulate gas removal from a vacuum chamber when used with an MKS controller.

The MKS Type 253B Exhaust Throttle Valve is a butterfly valve designed to regulate or shut off gas removal from a vacuum chamber when used with an MKS controller.

The MKS Type 253B Exhaust Throttle Valve is a butterfly valve designed to regulate gas removal from a vacuum chamber when used with an MKS controller. The 253B model line is available with multiple flange types, including CF, KF Style ISO, NW Style ISO, ASA, and JIS.

The MKS Type 253B Exhaust Throttle Valve is a butterfly valve designed to regulate the removal of gas from a vacuum chamber when used with an MKS controller.

The MKS Type 253B-60-2-2 is an exhaust throttle valve designed to regulate removal of gas from a vacuum chamber when used with an MKS controller.

The MKS Type 253B Exhaust Throttle Valve is a butterfly valve used to regulate gas removal from a vacuum chamber with an MKS controller.

The YES YTV F 1 is an automated optical inspection (AOI) system in the Metrology & Inspection category.

The Yes LP III M 3 HMDS is a vapor prime oven.

The YES 15 F HMDS Vapor Prime Oven is a thermal processing tool for HMDS vapor priming, with a maximum operating temperature of 200 °C and a chamber size of 16 inches per side.

The Yes 1224 P is a CVD (chemical vapor deposition) system.

The YES-58TA is a vacuum bake, HMDS vapor prime, and image reversal system that uses NH3 vapor for image reversal processing.

The PBV-300 is a YES polyimide/BCB vacuum cure oven line for 300mm and 200mm processing. The PBV-300 is placed in the Thermal / Diffusion category.

The YES PB12 is a PB-HV Series manual-load high vacuum oven, stated to support up to 300 mm wafers and to be designed for MEMS and semiconductor process applications.

The YES-CV100PL is a compact, fully automated downstream plasma stripper for 2 to 6 inch wafers.

The PB8-2P-CP is a YES polyimide bake oven configured for two cassettes of 8-inch wafers.

The YES PB8 is a high temperature vacuum oven for curing polyimide, SU8, BCB, and other films.

The YES 8-2P-CP is a manual-load high-temperature cure oven in the PB Series, specified for 200 mm wafers.

The SLR Series is a plasma processing system line for load-locked parallel-plate processes including RIE, PECVD, ICP, and ECR. The SLR B2 designation is not explicitly described in the provided source text.

The YES 310TA is a vacuum cure and HMDS vapor prime oven used for batch priming of wafers to improve photoresist adhesion.

YES-G500 is a plasma cleaning system with 2 powered shelves, used for gently cleaning substrates without hazardous solvents.

YES-R3 is a plasma cleaning system with sequential microprocessor control, up to 90 stored gas programs, and a 500 W power supply.

The Yes Sir Technology YS-N-IC 100 is a nitrogen generator.