Manufacturer
Applied Materials
Looking for practical guidance on Applied Materials? The reference remains the primary source; requests are private, the network is growing, and a relevant match is not guaranteed.
1522 entries
- 0720 00748 PartApplied Materials
- 0720 14337 PartApplied Materials
- 0620 05691 PartApplied MaterialsCategoryLab & Support Equipment
- 0020 23289 PartApplied Materials
- VIISta HC Ion ImplantApplied Materials
The Applied Materials / Varian VIISta HC Ion Implant is an ion implantation system.
CategoryIon Implantation - Centura Ultima+ HDPApplied Materials
The Applied Materials Centura Ultima+ HDP is a chemical vapor deposition system for 6-inch wafers, equipped with an ENI AM200 RF generator.
CategoryDeposition - Centura DPS PolyApplied Materials
The Applied Materials Centura DPS Poly Etcher is a decoupled plasma source etching tool for 6-inch wafers.
CategoryEtch - Centura I P 1Applied Materials
The Applied Materials Centura I P 1 is an oxide etcher for 6-inch wafers.
CategoryEtch - GF HW SC 140559 PartApplied Materials
- NanoSEM 3 D CD-SEMApplied Materials
The Applied Materials NanoSEM 3 D CD-SEM is a critical dimension scanning electron microscope for 6-inch wafers, manufactured in 2001.
CategoryMetrology & Inspection - Centura I Phase II OxideApplied Materials
The Applied Materials Centura I Phase II Oxide Etcher (also known as the 5200 Centura I Phase II) is an oxide etcher configured for 6-inch wafers with an upgrade path to 200 mm wafers.
CategoryEtch - Centura TPCC RTP XE+Applied Materials
The Applied Materials Centura TPCC RTP XE+ is an etcher designed for 8-inch wafers.
CategoryEtch - Producer IIIApplied Materials
The Applied Materials Producer III is a chemical vapor deposition (CVD) system.
CategoryDeposition - 0720 15139 PartApplied Materials
Applied Materials 0720 15139 is a part described as a Skt Pin 20-24 Awg Mate-N-Lok.
CategoryLab & Support Equipment - 0720 01226 PartApplied Materials
The Applied Materials 0720 01226 Part is a 3-position nylon connector housing cap.
- 0720 01264 PartApplied Materials
- 1390 00186 PartApplied MaterialsCategoryLab & Support Equipment
- 3691 01484 PartApplied Materials
- CB CP 22 101268 PartApplied Materials
The Applied Materials CB CP 22 101268 Part is a wire high voltage strand rated 22 AWG, 20 kVDC, and 150°C with silicon insulation.
- 1390 01522 PartApplied Materials
The Applied Materials 1390 01522 Part is a power cord cable rated at 10 AWG, 4 conductors, 600V, SO type.
- 0720 12676 PartApplied Materials
- 3500 00107 PartApplied Materials
The Applied Materials 3500 00107 Part is a Nut Keps 10-24 Ext-Tooth-Wshr Sst Psvt.
- Endura 2Applied Materials
Applied Materials Endura 2 is a 12-inch PVD (physical vapor deposition) system used for liner/barrier and front-end metallization applications.
CategoryDeposition - GF HW SC 102736 PartApplied Materials
- 0015 20064 PartApplied Materials
- 0720 05979 PartApplied Materials
The Applied Materials 0720 05979 is a spare part for semiconductor equipment, described as a Mini Hitemp Writeon Conn Yel.
- 0720 13094 PartApplied Materials
- 1390 01233 PartApplied MaterialsCategoryLab & Support Equipment
- 0010-13622 RF Match forApplied Materials
The Applied Materials 0010-13622 is an RF match unit intended for PVD (Physical Vapor Deposition) described as a High Efficiency HE RF Match-Bias.
CategoryDeposition - 0720 08969 PartApplied Materials
Applied Materials 0720 08969 is a part described as a contact socket for 28-24 AWG wire, gold, type DF3.
- 0720 07309 PartApplied Materials
The Applied Materials 0720 07309 is a connector plug with 3 positions, rectangular shape, and 3.6mm diameter contact.
- 0041 27342 PartApplied Materials
The Applied Materials 0041 27342 Part is a component described as a top plate, RF filter box, and E-chuck.
- CN CP 00 147893 PartApplied Materials
The Applied Materials CN CP 00 147893 is a connector receptacle housing with 9 positions, model CN CP 00 147893.
- 0020 40972 Spacer, RF CoilApplied Materials
The Applied Materials 0020 40972 Spacer, RF Coil is a spare part for the HDPCVD Ultima+ system.
- VIISta 810Applied Materials
Applied Materials / Varian VIISta 810 is a 12-inch medium current implanter.
CategoryIon Implantation - 0041 32922 PartApplied Materials
The Applied Materials 0041 32922 Part is a cover for an RF filter and Dz heater, used in the Producer GT system.
- 0720 01756 PartApplied Materials
The Applied Materials 0720 01756 is a connector strain relief cover with 5 positions, from the MTA series, made of nylon.
- 0720 12864 PartApplied Materials
The Applied Materials 0720 12864 is a connector pin part described as a Cont Conn Pin 24-20awg Crimp Tc Alomega.
- 0720 02370 PartApplied Materials
- 0720 05119 PartApplied Materials
- CENG 2 DryApplied Materials
The Applied Materials CENG 2 is a dry etcher used in semiconductor manufacturing.
CategoryEtch - UVision 3Applied Materials
The Applied Materials UVision 3 is a DUV brightfield wafer inspection tool introduced in 2007, offering 40% faster throughput and 20 nm sensitivity for 45 nm FEOL and immersion lithography.
- 0720 01297 PartApplied Materials
The Applied Materials 0720 01297 part is a connector socket contact for 20-14 AWG wire, made of brass with gold plating.
- 3690 00252 PartApplied Materials
- GF HW SC 137702 PartApplied MaterialsCategoryLab & Support Equipment
- TSVCTISET 07935 CoilApplied Materials
The Applied Materials TSVCTISET 07935 Coil is a coil component designated as NQ, IMP EB 3 for use with an Applied Materials P 5200 tool.
- 0041-26723 Bonded AssemblyApplied Materials
The Applied Materials 0041-26723 is a bonded assembly used in semiconductor packaging and bonding applications.
CategoryPackaging & Bonding - Centura DPS 2 G 5Applied Materials
The Applied Materials Centura DPS 2 G 5 is a semiconductor etcher with Metal 3ch and Axiom 1ch configuration, manufactured in 2008.
CategoryEtch - 0010-30139 PartApplied Materials
- P 16 072 AncolyzerApplied MaterialsCategoryLithography
- 0720 03038 PartApplied MaterialsCategoryLab & Support Equipment
- 3690 02489 PartApplied Materials
- VIISta 810 XEriApplied Materials
The Applied Materials / Varian VIISta 810 XEri is an ion implanter described as a 12-inch medium current system.
CategoryIon Implantation - E 500 HPApplied Materials
The Applied Materials / Varian E 500 HP is an implanter described as a medium current ion implantation system for 8-inch wafers.
CategoryIon Implantation - 0720 02358 PartApplied Materials
The Applied Materials 0720 02358 is an Applied Materials part described as 'Conn Guide Skt Corner 104cf Pos'.
- G 3 Lite SEM ReviewApplied Materials
The Applied Materials G 3 Lite is a scanning electron microscope (SEM) for review applications.
CategoryMetrology & Inspection - Centura Ultima TE HDPApplied Materials
The Applied Materials Centura Ultima TE HDP is a high-density plasma chemical vapor deposition (HDP CVD) system for 8-inch wafers, configured with one Ultima TE chamber, two DxZ nitride chambers, one wafer orienter chamber, and one multi-slot cooldown chamber.
CategoryDepositionWafer(1) Wafer Orienter Chamber - Charger UMBApplied Materials
Applied Materials Charger UMB is a PVD (physical vapor deposition) mainframe with 3 chambers and compatibility with Endura.
CategoryDeposition - 0720 01342 PartApplied Materials
The Applied Materials 0720 01342 is a connector socket part with crimp termination for 22-30 AWG wire.
- Producer GT APFApplied Materials
Applied Materials Producer GT APF is a PECVD (plasma-enhanced chemical vapor deposition) system.
CategoryDeposition
