Zygo
Newview 7300 3D Optical
The Zygo Newview 7300 is a 3D optical profilometer employing white light interferometry. The Zygo Newview 7300 uses Coherence Scanning Interferometry (CSI) to achieve sub-angstrom Z resolution. The Zygo Newview 7300 supports a maximum substrate size of 8 inches.[1]
What it is
The Zygo Newview 7300 is a 3 D optical surface profiler. The Newview 7300 is a white light interferometer (profilometer) used for non-contact measurement of surface topography.[1]
How it works
The Newview 7300 uses Zygo's Coherence Scanning Interferometry (CSI) technology. Measurements are non-contact and fast, requiring no sample preparation. The instrument achieves sub-angstrom Z resolution.[1]
What do the numbers mean?
Power & electrical4
- Power 100-240 Volts / 50/60 Hertz[2]
Wafer handling1
Optics & imaging4
- 1X, 2X, 5X Objectives[2]
Configuration & options2
- Additional Options Cables, Controls[2]
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
Not publicly documented
The following facts about the Newview 7300 3D Optical are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the Newview 7300 3D Optical are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the Newview 7300 3D Optical are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the Newview 7300 3D Optical are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the Newview 7300 3D Optical are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the Newview 7300 3D Optical is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (2)Every fact above is drawn from these public sources
- [1]nnci.net — nnci.netnnci.net
- [2]Inventory photo
Last updated Oct 11, 2026.
Compare with similar tools
View all →The KLA .204 PSL Wafer is an 8-inch NIST-traceable reference wafer compatible with Surfscan 6xy0 and Sp1 particle counters.
KLA .496 PSL Wafer is an 8-inch NIST traceable wafer stated to be capable on Surfscan 6xy0 and SP1.
The KLA .498 PSL Wafer is a NIST traceable reference wafer.
