CHA
Mark 50 Resolution
Plate 01CHA Mark 50 Sputtering and Evaporation Standard Operating Procedures
InrfucirvineWatch on YouTubePlate 02CHA® Mark 50 Lift-off Fixture
chaindustries1Watch on YouTubePlate 03CHA® Multi Source Mark 50
chaindustries1Watch on YouTubePlate 04CHA Mark 50 Electron Beam.avi
Dan WattWatch on YouTubePlate 05CHA® Mark 50 Planetary Fixture
chaindustries1Watch on YouTube
What it is
The CHA Mark 50 Resolution is a vacuum deposition system in the Mark 50 product line.[1]
Where it fits in the process flow
General reference — not yet source-verifiedThe CHA Mark 50 Resolution sits in the thin-film formation stage of a fabrication flow.
The CHA Mark 50 Resolution is used after substrate preparation and before later patterning or device completion steps that rely on the deposited film.
Applications
The CHA Mark 50 Resolution is used for evaporation and sputtering deposition processes.[1]
What do the numbers mean?
Vacuum & pumping1
Optics & imaging1
Configuration & options2
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
- System typeHigh-performance vacuum deposition system[1]
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What type of equipment is the CHA Mark 50 Resolution?
The CHA Mark 50 Resolution is a vacuum deposition system.[1]
Not publicly documented
The following facts about the Mark 50 Resolution are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the Mark 50 Resolution are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the Mark 50 Resolution are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the Mark 50 Resolution are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the Mark 50 Resolution are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the Mark 50 Resolution is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (1)Every fact above is drawn from these public sources
- [1]chaindustries.com — chaindustries.comchaindustries.com
Last updated Oct 6, 2026.
Compare with similar tools
View all →
The Applied Materials 0010-13622 is an RF match unit intended for PVD (Physical Vapor Deposition) described as a High Efficiency HE RF Match-Bias.
The Applied Materials 0020 12458 Part is an insulator, side match component for the Hdp-Cvd Ultima Plus system.