Comparison ledger
Cascade Microtech 103-754, Signatone WL-1160, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 103-754Cascade Microtech | WL-1160Signatone |
|---|---|---|
| OEM | Cascade Microtech | Signatone |
| Category | Test & Probe | Test & Probe |
| Wafer size | 6-inch diameter microchamber and thermal chuck | 150mm |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Cascade Microtech 103-754 | Signatone WL-1160 |
| Specifications | ||
| type | x-y-z-θ probe positioner[1] | — |
| installed on | HFTL 50-GHz Small-Signal Probe Station[1] | — |
| quantity in station | two[1] | — |
| station chuck size | 6-inch-diameter microchamber and thermal chuck[1] | — |
| Quantity per station | Two positioners[1] | — |
| Chuck size | 6-inch-diameter microchamber and thermal chuck[1] | — |
| Temperature range | -50 to 200 °C[1] | — |
| Product type | — | RF / Microwave Probe Station[2] |
| Application focus | — | high-frequency, high-power, and millimeter wave applications[2] |
| Operating characteristic | — | non-resonant operation is critical[2] |
| Chuck sizes | — | 150mm and 200mm chucks[2] |
| Calibration chuck | — | Independent calibration chuck located adjacent to the main chuck[2] |
| Calibration chuck material | — | Non-resonant polymer[2] |
| Microscope stage | — | 2" x 2" microscope stage[2] |
| Microscope compatibility | — | Supports most StereoZoom and high-powered microscopes[2] |
| Platform sharing | — | Uses the same stable platform as the S-1160 multipurpose probe station[2] |
| X-Y motion control | — | 150mm & 200mm manual X-Y motion control[2] |
| Microscope stage control | — | 50mm X 50mm microscope stage control[2] |
| Height control | — | Separate contact / separate and platen height control[2] |
| Z motion | — | Up to 30mm Z motion control of platen[2] |
| Micropositioner capacity | — | Holds up to four S-96MW microwave micropositioners[2] |
| Standard manifolds | — | Vacuum and DC manifolds standard[2] |
Plan your fab
Building a Test & Probe process? Get a complete equipment list.
Open the fab equipment planner →