Comparison ledger
EV Group 101, Nikon NSR S 208 D, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 101EV Group | NSR S 208 DNikon |
|---|---|---|
| OEM | EV Group | Nikon |
| Category | Lithography | Lithography |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | EV Group 101 | Nikon NSR S 208 |
| Specifications | ||
| OEM | EV Group[1] | — |
| Model | 101[1] | — |
| Equipment name | EVG 101 Spray Coater[1] | — |
| NEMO ID | evgspraycoat[1] | — |
| Training required | EVG 101 Training[1] | — |
| Training duration | 1.50 hours[1] | — |
| Processing technique | Resist Spray Coat (manual)[1] | — |
| Cleanliness | "All"[1] | — |
| Location | SNF Paul G Allen L107 Cleanroom[1] | — |
| Wafer diameter (substrate size) | up to 300 mm[2] | — |
| Available modules | Spin coat / OmniSpray® / develop[2] | — |
| Wafer handling options | Bowed / warped / thin wafer handling, edge handling[2] | — |
| Dispense options | Various resist dispense pumps covering viscosities up to 52000 cP; constant pressure dispense systems; EBR / BSR / pre-wet / bowl wash / liquid priming[2] | — |
| Processing technique (at SNF) | Resist Spray Coat (manual)[3] | — |
| Cleanliness group (at SNF) | "All"[1] | — |
| Configuration | — | Software ver. MCSW 180-P12/OCSW ver. 180-P10[4] |
| CIM | — | SECs[4] |
| Process | — | kRF[4] |
| Handler System | — | external FOUP system[4] |
| Factory Interface | — | SMIF[4] |
| Wavelength | — | 248 nm[5] |
| Lens NA | — | 0.82[5] |
| Exposure Area | — | 26 x 33 mm[5] |
| Reduction Ratio | — | 1/4[5] |
| Resolution | — | <110 nm[5] |
| Throughput (300 mm) | — | >147 wph[5] |
| Throughput (200 mm) | — | >165 wph[5] |
| Wafer Size | — | 200/300 mm[5] |
| Software Version | — | MCSW 180-P12 / OCSW ver. 180-P10[4] |
| Components | — | Amp Rack, Temperature Controller, Cymer Laser, Air Conditioner[4] |
| Throughput | — | 300 mm > 147 WPH; 200 mm > 165 WPH[5] |
| Included modules | — | Amp Rack; Temperature Controller; Cymer Laser; Air Conditioner[4] |
Plan your fab
Building a Lithography process? Get a complete equipment list.
Open the fab equipment planner →