Tenney
T 10 C 1.5 Temperature
What it is
The Tenney T 10 C 1.5 Temperature is a thermal or diffusion temperature chamber.[2]
The Tenney T 10 C 1.5 Temperature is a chamber with a temperature range of -70 to +180 degrees C, air cooling, a Watlow Model F4T programmer, over under temperature protection, chart and graphing capability, environmentally friendly refrigerants, a stainless steel interior, castors, one shelf, a 2 inch diameter feed thru port, a power requirement of 230V, 1PH, 40 Amps, and an internal size of 24 inches wide by 26 inches deep by 28 inches high.[1][2]
How it works
General reference — not yet source-verifiedA temperature chamber exposes a load to controlled hot and cold conditions inside an insulated enclosure.
A chamber of this class uses forced air circulation, temperature control hardware, and safety interlocks to move the internal environment toward a setpoint and hold it within a programmed range.
Where it fits in the process flow
General reference — not yet source-verifiedA thermal or diffusion chamber fits in environmental test and conditioning steps rather than in wafer fabrication processing.
A chamber of this class is used to expose parts, assemblies, or process samples to controlled temperature stress before, during, or after qualification activities.
Applications
General reference — not yet source-verifiedA temperature chamber is used for thermal cycling, temperature soak, and environmental stress testing.
A chamber of this class is used on components, materials, and assemblies that must be evaluated across hot and cold operating conditions.
What do the numbers mean?
Power & electrical1
Control & software2
- Software Required[1]
Dimensions & facilities1
Configuration & options21
- Air Cooled[1]
- Watlow Model #F4T Programmer[1]
- Over Under Temperature Protection Programmer[1]
- Has Chart & Graphing Capabilities[1]
- Environmentally Friendly Refrigerants[1]
- Stainless Steel Interior Castors 1 Shelf[1]
- 2" Dia. Feed-Thru Port[1]
- I.D. 24"W X 26"D X28"H[1]
What replaced it?
Alternatives
Tools documented as functional equivalents — same process step and wafer size, from a different manufacturer. Each equivalence cites its source.
- Thermotron Temperature— Same function class: Thermal / Diffusion, UnknownCompare in depthsource[3]
- Thermotron SE 600 13 13 Temperature— Same function class: Thermal / Diffusion, UnknownCompare in depthsource[1]
- Thermotron S 8 8200 Temperature— Same function class: Thermal / Diffusion, UnknownCompare in depthsource[4]
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
- Power230V, 1PH, 40 Amps[1]
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
Not publicly documented
The following facts about the T 10 C 1.5 Temperature are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the T 10 C 1.5 Temperature are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the T 10 C 1.5 Temperature are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the T 10 C 1.5 Temperature are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the T 10 C 1.5 Temperature are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the T 10 C 1.5 Temperature is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (4)Every fact above is drawn from these public sources
- [1]Inventory photo
- [2]waferpedia.com — waferpedia.comwaferpedia.com
- [3]Equipment inventory listing
- [4]Equipment inventory listing
Last updated Oct 9, 2026.
Compare with similar tools
View all →
The Thermotron S 8 8200 Temperature Chamber is an environmental temperature chamber with a 24 x 24 x 24 inch workspace and a temperature range of -70°C to +180°C.
The Thermotron SE 600 13 13 is a temperature chamber with a 20.7 ft³ workspace volume.
The Thermotron Temperature Chamber is a bench-top temperature test chamber with a temperature range of -70 to +170 degrees Celsius.