RECIF
SPP 300 Wafer
Wafer size
Front & Backside Wafer ID Reader (RFID)
Power
110 VAC, 15 A, 3 Wire, 1 Phase, Freq 60 Hz[1]
Vacuum
Optional Depending on LPS Used[1]
What is it?
Why won't it start?
Documented failure modes, common issues, and field considerations.
- Missing Boot Key
What do the numbers mean?
Power & electrical1
Vacuum & pumping1
Wafer handling4
Control & software1
- User Interface (front & Rear):[1]
Dimensions & facilities1
- CDA[1]
Configuration & options11
- 300 mm (12") FOUP Load Port[1]
- Backside Advance Contact[1]
- HEPA Filtered Mini Environment (FFU), ISO Class 1[1]
- LCD Flat PAnel Monitors[1]
- Keyboard / Track Mouse[1]
- Compatible With:[1]
- 3DIC (TSV / Glass / Stacks)[1]
- FO-WLP (Mold / Wraped)[1]
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Not publicly documented
The following facts about the SPP 300 Wafer are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the SPP 300 Wafer are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the SPP 300 Wafer are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the SPP 300 Wafer are not on record.
Answerable by: an engineer who operated it or OEM installation records
The process node or technology generation of the SPP 300 Wafer is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No publicly documented compatible parts, consumables, or accessories for the SPP 300 Wafer are on record.
Answerable by: an OEM parts catalog or a service engineer
Sources & citations
Sources (1)Every fact above is drawn from these public sources
- [1]Inventory photo
Last updated Sep 22, 2026.
Compare with similar tools
View all →Brooks 017-0146-01 is a prealigner manufactured by Brooks.
The CEE 100 is a lithography spin coater/developer tool that accepts up to 6-inch wafers and supports programmable multi-step processing.