Newport
2835 C Multifunction Optical Meter
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
What it is
How it works
General reference — not yet source-verifiedAn optical meter measures optical signals by converting received optical power into an electrical reading. A multifunction optical meter typically supports more than one measurement mode or input configuration within a single instrument.
Where it fits in the process flow
General reference — not yet source-verifiedAn optical meter belongs in the measurement and characterization part of an optics workflow. An optical meter is used after optical sources, fibers, couplers, or other photonic components have been assembled or connected, where the instrument can verify optical signal levels and support alignment or validation tasks.
Applications
General reference — not yet source-verifiedA multifunction optical meter is used for optical power measurement and related inspection tasks in laboratory and production environments. A multifunction optical meter is also used with fiber-optic and photonic components during setup, calibration, troubleshooting, and verification.
What do the numbers mean?
Optics & imaging2
Configuration & options5
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What types of optical detectors are used in this class of instrument?General reference — not yet source-verified
Multifunction optical meters typically employ interchangeable detector heads with photodiodes made of materials such as silicon, germanium, or indium gallium arsenide (InGaAs) to cover various wavelength ranges from the visible to the near-infrared.
Can the meter measure both continuous wave (CW) and pulsed light?General reference — not yet source-verified
Many meters in this class can measure CW light directly, and some models offer special modes for measuring average power of pulsed signals, though the specific capability depends on the instrument's design and options.
How does the instrument handle wavelength-dependent calibration?General reference — not yet source-verified
Class-level meters include a calibration factor table that adjusts the photodetector responsivity for different wavelengths. Users can select or enter the wavelength of the light source to obtain accurate absolute power readings.
What is the typical interface for data output?General reference — not yet source-verified
Such instruments often provide analog outputs (e.g., voltage proportional to power) as well as digital interfaces such as GPIB, USB, or Ethernet for remote control and data logging.
Not publicly documented
The following facts about the 2835 C Multifunction Optical Meter are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the 2835 C Multifunction Optical Meter are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the 2835 C Multifunction Optical Meter are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the 2835 C Multifunction Optical Meter are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the 2835 C Multifunction Optical Meter are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the 2835 C Multifunction Optical Meter is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (3)Every fact above is drawn from these public sources
- [1]Inventory photo
- [2]Inventory photo
- [3]Equipment inventory listing
Last updated Oct 7, 2026.
Compare with similar tools
View all →
The Perkin Elmer 1050 UV-VIS Spectrometer is an instrument used for analyzing ultraviolet and visible light absorption spectra.
The Agilent 11980 A is a fiber optic interferometer for precision optical measurements.