Comparison ledger
Laurell EDC-HL-15, Laurell WS-650-8, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | EDC-HL-15Laurell | WS-650-8Laurell |
|---|---|---|
| OEM | Laurell | Laurell |
| Category | Spin coater | Spin coater |
| Wafer size | 300mm | 200mm |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | 650-series | — |
| Family | Laurell EDC-HL-15 | Laurell WS-650-8 |
| Cited variants |
| |
| Specifications | ||
| Model | EDC-HL-15 B[1] | WS-650-8B[2] |
| Series | 650-series EDC system[1] | 650-series[2] |
| Wafer/substrate capacity | Up to ø 300 mm wafers and 9" × 9" (229 mm × 229 mm) substrates[1] | — |
| Maximum speed capability | 12,000 RPM with vacuum hold-down[1] | — |
| Recommended speed | 3,000 RPM[1] | — |
| Recommended chuck type | Non-vacuum chucks[1] | — |
| Power | 95 to 240 VAC, 47/63 Hz, ~300 Watts[1] | 95 to 240VAC, 47/63HZ, ~300 Watts[2] |
| Category | Spin coater[1] | Spin coater[2] |
| Wafer capacity | Up to 300mm wafers[1] | Up to 200 mm wafers[2] |
| Substrate capacity | 9 in × 9 in (229mm × 229mm) substrates[1] | Up to 7 in x 7 in (178 mm x 178 mm) substrates[2] |
| Product type | — | Spin coater[2] |
| Maximum rotational speed | — | 12,000 RPM[2] |
| Basis for max speed rating | — | Based on a 100 mm silicon wafer[2] |
| Process controller | — | 650-series process controller with robust microprocessor and accompanying PC software[2] |
| Power requirement | — | 95 to 240 VAC, 47/63 Hz, approximately 300 W[2] |
| Nitrogen/CDA process/seal purge | — | 60 to 70 PSIG (4 to 5 bar)[2] |
| Vacuum suggestion | — | 25 to 28 inches Hg; 4.5 SCFM at 0 inches Hg[2] |
| Applications | — | Coating, etching, developing, rinsing-drying, and cleaning[2] |
| Speed reference condition | — | Based on a 100mm silicon wafer[2] |
Plan your fab
Building a Spin coater process? Get a complete equipment list.
Open the fab equipment planner →