Comparison ledger
Ontrak DSS 200 Series II Post, Strasbaugh 100R16, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | DSS 200 Series II PostOntrak | 100R16Strasbaugh |
|---|---|---|
| OEM | Ontrak | Strasbaugh |
| Category | CMP | CMP |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | 2023 | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Ontrak DSS 200 | Strasbaugh 100R16 |
| Specifications | ||
| Voltage | 200/ 208 / 220 VAC[1] | — |
| Configuration | 50/60 Hz[1] | — |
| Breaker | 25 A (5.2 kW)[1] | — |
| Total FLA | 6.8 A (1.4 kW)[1] | — |
| Largest Load | 3.6 A (0.8kW)[1] | — |
| CDA (Clean Dry Air) | 80-100 PSI (Inlet)[1] | — |
| DI Water | 60-80 PSI (Inlet)[1] | — |
| Process Solutions / Chems | 15 PSI (Inlet)[1] | — |
| Drain | 132 GpH Peak, 60 GpH Idle, 2" CPVC[1] | — |
| Noise Level | 70 dB (during process)[1] | — |
| Total FL | 6.8 A (1.4 kW)[2] | — |
| Largest load | 3,6A (0,8kW)[3] | — |
| Process solutions/chems | 15PSI (Inlet), 1/4" OD Teflon tubing[3] | — |
| Wafer Sizes | 8 inch[1] | — |
| CDA (Clean Dry Air) Inlet | 80-100 PSI, 3/8" OD Tubing[1] | — |
| DI Water Inlet | 60-80 PSI, 3/4" OD Teflon Tubing[1] | — |
| Process Solutions / Chems Inlet | 15 PSI, 1/4" OD Teflon Tubing[1] | — |
| Wafer Size | 8 inch[1] | — |
| CDA Inlet Pressure | 80-100 PSI[1] | — |
| CDA Tubing | 3/8" OD[1] | — |
| DI Water Inlet Pressure | 60-80 PSI[1] | — |
| DI Water Tubing | 3/4" OD Teflon[1] | — |
| Process Solutions / Chems Pressure | 15 PSI[1] | — |
| Process Solutions / Chems Tubing | 1/4" OD Teflon[1] | — |
| Drain Flow (Peak) | 132 GpH[1] | — |
| Drain Flow (Idle) | 60 GpH[1] | — |
| Drain Pipe Size | 2" CPVC[1] | — |
| Noise Level (during process) | 70 dB[1] | — |
| type | — | 1 spindle grinder/polisher[4] |
| drive system | — | DC drive system with 2 motors[4] |
| spindle RPM | — | 1-180 RPM[4] |
| eccentric RPM | — | 1-90 RPM[4] |
| controls | — | digital timer; air down switch; spindle and eccentric speed dials; air regulators[4] |
| capacity | — | 16 inches[4] |
| spindle size | — | 1-8 TPI[4] |
| overall dimensions | — | 28 inches x 36 inches x 48 inches[4] |
| weight | — | 500 lbs[4] |
| origin | — | made in the USA[4] |