Comparison ledger
Esec DB 2100 HS, MRSI HVM3, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | DB 2100 HSEsec | HVM3MRSI |
|---|---|---|
| OEM | Esec | MRSI |
| Category | Packaging & Bonding | Packaging & Bonding |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | 2018– |
| Lifecycle | — | — |
| Lifecycle milestones | — | 2019 Name change |
| Control system | — | — |
| Generation | — | — |
| Family | Esec DB 2100 HS | MRSI HVM3 |
| Cited variants |
| |
| Specifications | ||
| Accessories | Monitors[1] | — |
| Configuration | 208-240 VAC[1] | — |
| Rating of Largest Motor | 3 A, 230 VAC[1] | — |
| Machine Main Breaker Rating | 20 A[1] | — |
| Main Machine Breaker Rating | 20 A[6] | — |
| Voltage | 208-240 VAC[5] | — |
| Main Breaker Rating | 20 A[5] | — |
| Largest Motor Rating | 3 A, 230 VAC[5] | — |
| Operating System | Windows Embedded Standard[5] | — |
| Operating Voltage | 208-240 VAC[1] | — |
| Software Platform | Windows Embedded Standard[5] | — |
| Supply voltage | 208-240 VAC[1] | — |
| Largest motor rating | 3 A at 230 VAC[1] | — |
| Application | — | Microwave modules, hybrid, optical modules, epoxy and eutectic die bonding[7] |
| Placement accuracy | — | 3 microns, 3 sigma, true radial placement (depending on application)[7] |
| Placement repeatability | — | ≤ 1 micron[7] |
| XY motors | — | Brushless DC linear motors with glass-scale encoder resolution of 50 nm[7] |
| X travel | — | 17.5 in (444.5 mm)[7] |
| Y travel | — | 36.0 in (914.4 mm)[7] |
| Z travel | — | 1.5 in (38.1 mm)[7] |
| Theta travel | — | 360°[7] |
| Theta resolution | — | 0.0045°[7] |
| Pressure control | — | 10 g to 5 kg per placement[7] |
| Cameras | — | 2 down-looking cameras sharing an optical path; 1 up-looking camera[7] |
| Vision system | — | Edge detection and pattern recognition[7] |
| Lighting | — | Red, green, and blue; ring or coaxial illumination; programmable intensity[7] |
| Pickup nozzles | — | 13 in standard nozzle changer; multiple changers optional; can also carry epoxy dispensing heads[7] |
| Waffle packs | — | Up to 72 2 x 2 in waffle packs (50.8 x 50.8 mm) or Gel-Paks™ or 4 x 4 in (101.6 x 101.6 mm)[7] |
| Tape and reel feeders | — | Up to ten 8 mm tape and reel feeders[7] |
| Eutectic bonding | — | Programmable ramp rate; maximum temperature 450°C[7] |
| Process gases | — | Nitrogen, argon, N2-H2, or Ar-H2[7] |
| Dispense pumps | — | 2 syringe rotary screw pumps or time/pressure-controlled pumps[7] |
| Dispense height sensing | — | 3-point laser height mapping of the substrate plane[7] |
| Dispense needle cleaning | — | Automated programmable cleaning between pattern dispense intervals[7] |
| Dispense needle calibration | — | Automatic software calibration using beam sensor[7] |
| Repeatability | — | ≤ 1 µm[7] |
| Minimum chip size | — | 0.008 sq. inch (200 sq. micron)[7] |
| Illumination | — | RGB; ring or coaxial; intensity programmable[7] |
| Eutectic temperature | — | up to 450ºC[7] |
| Minimum placement force (closed loop) | — | 10 g[7] |
| Maximum placement force (closed loop) | — | 5 kg[7] |
Plan your fab
Building a Packaging & Bonding process? Get a complete equipment list.
Open the fab equipment planner →