Comparison ledger
Brooks 017-0146-01 Prealigner, Canon MPA 600 Super Mirror Projection Mask, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 017-0146-01 PrealignerBrooks | |
|---|---|---|
| OEM | Brooks | Canon |
| Category | Lithography | Lithography |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Brooks 017-0146-01 Prealigner | Canon MPA 600 Super Mirror Projection Mask |
| Specifications | ||
| Manufacturer | — | Canon[1] |
| Model | — | MPA 600 Super[1] |
| Tool type | — | Super Mirror Projection Mask Aligner[1] |
| Application | — | mass production of VLSI devices[2] |
| Wafer sizes available | — | 6", 5", and 4"[2] |
| Mask sizes available | — | 7", 6", and 5"[2] |
| Illumination | — | 2KW High Pressure Mercury Lamp[2] |
| Intensity | — | > 600mW / cm2 (6 inch wafer)[2] |
| Illumination uniformity | — | + 3%[2] |
| Aperture sizes | — | 0.7, 0.6, 0.5[2] |
| Exposure uniformity | — | + 3%[2] |
| Resolution | — | 1.5um[2] |
| Depth of focus | — | > + 6um (linewidth 1.5um)[2] |
| Magnification | — | < 0.2um (PDC ON)[2] |
| Distortion | — | 3sigma < 0.5um (PDC OFF)[2] |
| Scanning accuracy | — | < + 1.5%[2] |
| Auto alignment accuracy | — | LBS AA 3sigma < 0.58um (HeNe laser beam scan); TV AA 3sigma < 0.43um (TV image processing)[2] |
| Throughput (6 inch wafer) | — | > 89 wfs/h (first mask mode); > 77 wfs/h (LBS AA mode); > 68 wfs/h (TVAA mode)[2] |
| Auto feeder | — | Single or double, cassette to cassette, backside wafer handling[2] |
| Required facilities | — | 200 VAC, 3Phase, 6 kVA, 50/60Hz; Air Supply(CTC): 200 VAC, 3Phase, 8 kVA, 50/60Hz; CDA(Clean Dry Air)Pressure: minimum 6.5 kg/cm2, flow rate 130 lit/min; Vacum: 50 cmHg or more; Exhaust Flow(for illuminator): 6.5 m/sec to 9.5 m/sec (measured at illuminator output)[2] |
Plan your fab
Building a Lithography process? Get a complete equipment list.
Open the fab equipment planner →