Comparison ledger
ASML PAS 5500 750, EV Group 101, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | PAS 5500 750ASML | 101EV Group |
|---|---|---|
| OEM | ASML | EV Group |
| Category | Lithography | Lithography |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | ASML PAS 5500 | EV Group 101 |
| Specifications | ||
| Configuration | 248nm (KrF)[1] | — |
| Software Version | 8.9.0.C[2] | — |
| CIM | SECS[2] | — |
| Handler System | Wafer Transfer System[2] | — |
| Options System | Operator Console Unit[2] | — |
| Factory interface | SMIF[2] | — |
| OEM | ASML[1] | EV Group[3] |
| Model | PAS 5500 / 750[1] | 101[3] |
| Wafer size | 8 inch[1] | — |
| Exposure wavelength | 248nm[1] | — |
| Light source | KrF[1] | — |
| Equipment name | — | EVG 101 Spray Coater[3] |
| NEMO ID | — | evgspraycoat[3] |
| Training required | — | EVG 101 Training[3] |
| Training duration | — | 1.50 hours[3] |
| Processing technique | — | Resist Spray Coat (manual)[3] |
| Cleanliness | — | "All"[3] |
| Location | — | SNF Paul G Allen L107 Cleanroom[3] |
| Wafer diameter (substrate size) | — | up to 300 mm[4] |
| Available modules | — | Spin coat / OmniSpray® / develop[4] |
| Wafer handling options | — | Bowed / warped / thin wafer handling, edge handling[4] |
| Dispense options | — | Various resist dispense pumps covering viscosities up to 52000 cP; constant pressure dispense systems; EBR / BSR / pre-wet / bowl wash / liquid priming[4] |
| Processing technique (at SNF) | — | Resist Spray Coat (manual)[5] |
| Cleanliness group (at SNF) | — | "All"[3] |
Plan your fab
Building a Lithography process? Get a complete equipment list.
Open the fab equipment planner →